We hope you find the Honda CVT Transmission Fluid Change Guide helpful. Guide and pictures are from a 2015 Honda Civic, but owners of other Honda vehicles with CVT transmissions such as Fit, Freed, HR-V, Mobilio, Jazz, and Insight will also find these instructions helpful. Check transmission fluid level at operating temperature with the engine off-car on level ground.When you drain the transmission pan and refill, you only change about 40% of the transmission fluid.If there is no transmission fluid dripping from the check hole, top off until you see transmission fluid dripping from the check hole. There should be a small amount of automatic transmission fluid dripping from the hole when removing the 17mm bolt. Recheck the automatic transmission fluid level via the check hole. Start the engine, check for any issues/leaks, and drive it for 15 minutes to bring it to normal operating temperature.
#Honda civic cvt transmission fluid install#
Install the 17mm bolt on the side of the transmission housing. Remove the funnel and reinstall the cap for the filler hole.
This is a black plug with a hook at the end.Īdd the recommended Honda automatic transmission fluid until it starts to drip at the check hole.
Remove the fill plug located at the top of the automatic transmission housing. The level is full when transmission fluid starts to drip out of this hole. This is where you will check the transmission fluid level if your Honda does not have a dipstick. Remove the 17mm bolt on the side of the transmission housing. Also suitable for Honda cars where HMMF is recommended. Reinstall the drain bolt and tighten it to 35 ft-lb. Genuine Honda CVTF suitable for Honda Fit, Accord, CRV, Stream, Civic, Insight models with CVT gearbox.
0 kommentar(er)
